The New VapeOnly Aura Mini Kit - 1450mAh, brings the unique design of TAC vertical coils which prevents leaking or splitting back issue found with many tanks and atomizers. Its a sleek design with a comfortable mouthpiece that's stylish, lightweight and compact.
- Top Filling: Easy Operation, anti-leaking, the e-liquid is simple to be re-filled and the coil is easy to change
- Innovative Anti-Leaking Design: Innovative top air intake, top-fill design, maximizes the prevention of e-liquid leaking.
- Luft a: Innovative TAC vertical coils, twice the vapor, greatly enhances the volume of vapor and taste. Pure taste, no burnt.
- Large Capacity: Long Endurance: Built-in 1450mAh high-quality lithium battery, designed for long usage periods.
- Clear and Simple Light Indicators: To help distinguish different kinds of battery modes.
- Size: 16*150.5mm
- Wattage output: 10-35W
- Output Voltage range: 3.3-4.2V
- 1 x VapeOnly Aura Mini Battery
- 1 x VapeOnly Aure Mini Atomizer
- 2 x TAC vertical coils (0.33O, 0.5O)
- 1 x Extra Mouthpiece
- 1 x USB cable (1.5m)
- 1 x User Manual
- Power on and off: press the button for 5 times in quick succession to turn on or turn off the Mod;
- Vaping: press power button and inhale (no longer than 10 seconds at one time). White LED light will illuminate when you press the power button and go out once you release
- Charging: simply charge the mod by connecting it with a computer or a wall adapter via USB cable. When it's fully charged, the button light will go out.
- Low Resistance Protection: When the battery is on, atomizer will not work if its resistance is lower than 0.3ohm when you press the power button. The white LED light will double flash 5 times with the battery going to standby mode.
- Low Voltage Protection: When the battery is on and the voltage is low, hold down the power button, the white and red LED light will flash 5 times each alternatively with the battery going to standby mode and not working. Then please charge your battery.
- Open Circuit: When the battery is on, if under open circuit situation or no atomizer is connected, the white LED light will have a single flash 10 times with the battery going to standby mode when you press the power button.
- Overheat Protection: When the battery is on, hold down the power button, the red LED light will triple flash 5 times with the battery going onto standby mode if the temperature of the device is higher than the setting point.
- Battery Overload Protection: When the battery is on, hold down the power button, the red LED light will double flash 5 times when the battery going onto standby mode if the voltage is lower than 3.5V, and the resistance is lower than 0.5O.
Please note: there is no warranty on tanks and coils, there are exclusions to this, please read our warranty policy for details