Details
The Dovpo E-LVT2.0 adopts the latest intelligent circuits, it allows the battery to perform
better and extends the battery life. The dual-mode constant voltage and constant power
can be adjusted. The 510/ego connector can accept a variety of different atomizers. The rubberized coating
allows for more rugged use making it a great option for hunters, construction workers and others who
will use this in more extreme environments
Features
- Uses a zinc alloy with a silicone rubber coating process a first in this industry.
- Dust-proof,water resistant,IPX1(protection rating)
- Fully Rechargeable
- Can be used as a Power bank for digital devices.
- Emergency flashlight
- Replaceable 18650 battery(Not Included)
- Display the battery voltage
- Display the current output power(Volts or Watts)
- Variable wattage from 7w to 30w
- Compatible with 510 threaded devices
- Removable connector,so you can easily remove the atomizer and clean.
- Static current switch, so no loss of power
- Function lock(To avoid accidentally changing the settings)
- Over limit vaping alarm.
- Short-circuit protection.
- Battery polarity protection.
- Battery LED status Indicator
- Overcharge protection/over-discharge protection
- Hidden exhaust hole,to ensure the safety of product if battery failure occurs.
Instruction Manual
1.Remove the battery cover using the supplied allen wrench. Insert an 18650 battery into the battery box.
The E-LVT2.0 will power on, Display will show the number 888. The LED' s will flash red, yellow, then green.
The E-LVT2.0 will then power off . Replace the battery cover and the unit is ready for use
2.Press the fire button 3 times within two seconds continuously. LED's will flash red, yellow then
green and the digital display will show (ON) the E-LVT2.0 is now ready to vape. After the E-LVT2.0 is
on the led indicator lights will show the battery capacity when pressing the fire button.
(Green = best, Yellow = caution, Red = time to charge the battery The maximum puff time is 10 seconds,
after 10 seconds the LED will blink five times and the atomizer will stop working
3.When turned on, the display will show "LOC" when the button "+" or "-" are pressed. To unlock press
and hold the "+" and "-" at the same time for 5 seconds , then the function of "+" and "-" will become
usable again. To lock the function buttons, just press and hold both "+" and "-" buttons for 5 seconds
again, then the button "+" and "-" will became unusable.
4. Adjusting the power:
When "+" or "-" are unlocked. The output power will increase or decrease by 0.1W increments when pressing
the "+" or "-" and it can be changed continuously when you hold the button down. The adjustable range is
7W~30W.
5.The display will show the current voltage of battery when pressing "+" and fire button at the same time
for 2 seconds continuously
6. When pressing "+" and "-" for 2 seconds simultaneously, the display will show the resistance of the
atomizer, or show "non" when no atomizer is on the mod.
7.To turn on the flashlight press the "-" and fire button at the same time for two seconds continuously.
To turn off the flashlight press the two buttons for two seconds continuously again.
8.To turn off your E-LVT2.0 press "fire key" 3 times within 2 seconds the display will show "OFF
9.The E-LVT2.0 can be charged with the USB port on your computer through the mini USB cable. The LED
indicator of your E-LVT2.0 will turn on while charging and turn off when complete.
10.Turning the switch to "ON", the display will show "---", then you can charge your digital product
through the USB port, Please note charging will not work if your battery is low on power
11.When the resistance of the atomizer is too low or the atomizer has a short circuit, the display will
show "0.0R" When the fire button is pressed, the indicator will glow red and there will be no output.
12.Distinction of LED light colors:
The led light will turn red when the battery voltage is less than 3.6V; turn yellow when it is 3.6-3.75V ;
turn green when it is over 3.75V.
13.Recommended power range corresponding to the resistance:
- 0.3-1.0ohm: 15-30W
- 1.0-3.0ohm: 7-15W
