Kanger Mini Protank II Bottom Coil Changeable Glass Clearomizer

• It uses pyrex glass and hard metals instead of plastic made out of poly-carbonate. This makes the device more durable and resistant to acidic e-liquids.
• eGo thread, it can work with 510/eGo/eGo-T/eGo-C/eGo-C Twist battery/eVic
• 2.5ml e-liquid capacity

1. Stronger base
2. Replaceable! Glue-free.
3. 1.5ml e-liquid capacity

• Stainless Drip tip 1pc
• Top connector ring 1pc
• Pyrex Glass tube (clear color) 1pc
• Bottom connector ring 1pc
• Coil unit, 1pc 1.8ohm, 1pc 2.2ohm
• Connector base 1pc
• Manual 1pc

1. Turn upside down the cartomizer, then screw off the connector.
3. Use the syringer or dropper to fill less than 1.5ml e-liquid. Do not overfill it.
5. Carefully screw on the connector, connect it with the battery and enjoy it.

• Turn upside down the cartomizer, then screw off the connector. Take out the old coil unit from the bottom base, replace with new one. So easy!

1. It is designed to work with Joye eGo, Joye eGo-T and Joye eGo-C, eGo-C Twist, eVic, 510 battery specially. We can't guarantee that it can work with non-Joyetech products!
3. Make sure the cartomizer should be screwed back tightly onto the Joye eGo/eGo-T/eGo-C/eGo-C Twist/510 battery.
5. Please be sure that the coil unit is screwed into the cartomizer tightly. If you get few vapor when you use, try to make the clear cartomizer upside down to let the fibre wick and coil get e-liquid, which are on the top of the cartomizer.
7. When the cartomizer does not perform well or stops working due to heavy use, just replace the coil unit with a new one, you will get a new cartomizer!

Please note: DOA (dead on arrival) warranty only on this item please post ticket within 24 - 48 hours of arrival.