Feature:
- Adjust the voltage from 3V to 6V to your need,higher voltage will produce bigger vapor.
- Allows you to measure and display the resistance of the atomizer
- Display the power condition of the 18350/18650 battery by bar.
- Short circuit Self-protection.When atomizer resistance is below 1.3ohm,or incorrect usage(such as reverse battery) leading to short circuit,the device will turn off itself.
- Able to work with 510,dct,ce4,CE5 ,vivi nova and ego series atomizers.
Safety system:
- super low quiescent current protection
- Reverse battery protection
- over-current protection
- short circuit/atomizer protection
- warning against low voltage
- vent hole get rid of discharge
This mod requires either one 2200mah 18650 battery unprotected or 2 18350 batteries for the longer setup and 1 18350's 900mAh batteries for the shorter setup, these are not included
This mod does not include a battery charger we recommend the Trustfire TR-001 Mod battery charger
How to increase and decrease output voltage?
- Click the big button for 5 times in 2 seconds to turn it on. The default mode is constant voltage.
- Click the left mini button each time to decrease the voltage 0.1v.
- Click the right mini button each time to increase the voltage 0.1v
How to check and display the atomizer's resistance?
Press the right mini button for 3 seconds to show the resistance of atomizer
How to check and display the li-ion batteries'voltage?
Press the left mini button for 3 seconds to show the current voltage.
How to change mode 1 to mode 2?
Press both 2 mini buttons for 3 seconds to switch between 2 modes.
How to increase and decrease output power?
- Switch to model 2 constant power.
- Click the left mini button each time to decrease the power 0.5 Watt
- Click the right mini button each time to increase the power 0.5 Watt.
The eGo Vamo has the following protection / functions:
- When you press the button 10 seconds or more, eGo Vamo will turn it off automatically.
- When a single battery's voltage is less than 3.2v or double 18350 batteries voltage is less than 6.4v, the screen will display LO v, which indicates that the batteries need charge.
- When you use an atomizer at 1.2ohm or less, the screen will display LO O, which indicates that you need to use a new atomizer at higher resistance.
- When the atomizer you are using has a short circuit,the screen will display LO v.
- When you put the li-ion battery incorrectly inside eGo Vamo, it won't work or be damaged either.
