The ismoka iGo is a 510/eGo threaded electronic cigarette that features pass through and variable voltage technology.
It is made of a lightweight metal composite material with a black or silver satin finish. It uses 16650 li-ion battery only (ordered separately. It has the standard 510/eGo thread.
Use the micro USB cable to charger the battery when assemble. Or you can use special li-ion charger to charger battery.
The control head retains the design of side USB port, providing a convenient charging way. The LED light is red when it is charging and will turn green when it finishes charging.
- Short circuit protection
- Discharge and overcharge protection
- Low voltage protection
- 10 seconds cut-off time
- 1 x iStick iGo MOD (without cell)
- 1 x USB Cable
To turn on battery, press the manual button 5 times within 2 seconds. You will see Blue LED flash. To turn off battery, press manual button 5 times within 2 second as well, the blueLED will flash! No more firing in your pocket!
Two modes to switch:
the constant voltage output mode( gives constant 3.3V) and variable voltage output mode(change from 4.2V to 3.3V as power decrease)
Switching operation and features:
1. From constant voltage output mode to new battery voltage voltage output:
1.1 When the mode is 3.3v constant output mode, lock the battery by 5 clicks first(orange LED blinks 3 times).
1.2 By pressing button for 5 seconds(not 5 clicks), LED will change to orange with 3 blinks. The battery has switched to variable voltage output mode(battery voltage output mode).
1.3 Then click the button for 5 times to turn on the battery, then you can smoke in battery voltage output.
1.4 In new battery voltage output mode, the LED is orange.
2. From new battery voltage output to constant voltage output mode:
2.1 In new battery voltage output mode, lock the battery by 5 clicks first(orange LED blinks 3 times).
2.2 By pressing button for 5 seconds(not 5 clicks), LED will change to BLUE with 3 blinks. And the mode has switched to 3.3V constant voltage output mode.
2.3 Then click the button for 5 times, then you can smoke in 3.3V constant voltage.
2.4 In 3.3V constant voltage, the LED is white.
Power Display Function:
From fully charged to 50% power, the LED displays WHITE.
50 to 10% displays a light BLUE
when the power is less than 10%, it displays a Dark Blue to notify you that the battery needs to be charged.
Eleaf now requires S/N (serial number) before providing replacements (due to counterfeits in market). We recommend you to keep the packing boxes after you get parcel, or take a picture of SN before you discard it. Thank you!
Warranty: Please refer to Warranty Policy for details.